Linear Actuator

Premium Motion's linear actuator is versatile and can be used for lifting, dropping, sliding, or tilting machines or materials. These actuators provide safe and precise motion control that is efficient and requires little to no maintenance. They are commonly used in solar tracking applications. Electric linear actuators use a DC motor, a series of gears, and a lead screw to drive the main rod shaft. The size of the motor determines the differences between actuators. Linear actuators have two load capacity variables: static and dynamic. Dynamic load capacity refers to the amount of force applied when the actuator is in motion, whereas static load capacity is the force it can withstand while holding a load in place.

  • Input power of gearbox: 160-200 W @ 2800 rpm max

  • Actual gearbox ratio: 110:1

  • Output Speed: 1.54 mm/s without load, 1.22 mm/s with load

  • Operating temperature range: -40°C to 65°C max

  • Lubrication used for gearbox: Synthetic Grease

  • Rated max dynamic load: for 19,000 cycles 31,000N push/pull, extreme load: 50,000N

  • Static load: max 110,000N quarter extended, 72,000N half extended, 55,000N fully extended

  • Max lateral load of 2500N at eyelet when fully extended

  • Rated max dynamic load: for 19,000 cycles 31,000N push/pull, extreme load: 50,000N

  • Static load: max 110,000N quarter extended, 72,000N half extended, 55,000N fully extended

  • Max lateral load of 2500N at eyelet when fully extended